Termination Reference Chart
Termination Options
Wire Termination Options
End Cut
Wire is cut even at customer specified length.
Wire Slit
Where parallel wire is used, ends can be separated from each other to customer specifications.
Wire Strip
Wire ends are “stripped” of their insulation material to expose the inner copper strands.
Stagger Cut
Wires are cut and terminated at different lengths according to customer specifications.
Cable Termination Options
Blunt Cut
Cable is cut even at customer specified length.
Remove Outer Jacket
Also known as ROJ, the outer insulating cable jacket is removed to expose the inner wires. Length is determined by the customer.
ROJ & Stripped Wires
Outer cable jacket is removed and wire ends are stripped of insulating material.
Stagger Cut
Outer cable jacket is removed and wires are cut and terminated at different lengths.
Termination Connectors
Quick Connect
Available In: Un-Insulated, Pre-Insulated, Fully-Insulated, Right-Angle (Flag)
Ring Terminal
Used to attach product with screw or bolt. Perfect for a ground connection. Also available in locking.
Spade or Fork Terminal
Similar to a Ring Terminal, but removable without completely unscrewing bolt or screw.
Ferrule Terminal
For use with Terminal Blocks. Used to crimp and secure bare copper strands. Also available in a double for crimping 2 separate wires.
Disclaimer
The information contained in this website is for general information purposes only. The information is provided by DSM&T Company Inc. and while we endeavor to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.